You can click on any picture to view a larger image

receiver-tA camper receiver is bolted and welded to your vehicle frame. The lift uses the outside receivers and the center is used for towing.

exploded-view-tLay the lift pieces out on a level surface according to the photo supplied with the lift.

Insert the lift assemblies into the receiver locked in the up position and secure with 5/8" pins.

winch-bar-tSlide the winch bar into the right and left lift assemblies.

lifting-bar-tUsing two 3/4" pins, attach the lifting bar to the lift assemblies.

winch-tAttach the electric winch to the winch bar with 2 bolts.

kick-plate-tb-receiver-tBolt the tow bar onto the lift extension using 8 bolts.

left-extension-tSlide the left lift extension into the lift assembly and secure with a 5/8" pin.

Slide the right lift extension into the lift assembly and secure with a 5/8" pin.

tray-tAttach the motorcycle tray to the lift extensions using 2 7/16" bolts.

tail-light-kit-tMount the tail lights to the tray using the supplied wire harness and wiring diagram.

wire-tWire the electric winch to a 12 volt source from your coach. Quick connect wiring is supplied.

 

Shawn demonstrates the quick and easy assembly of the Overbilt Lifts Electric Motorcycle Lift